Adhesion • Strength
Safety • Economy
Water Resistance

Wall and Floor Primers and Sealers

871 Primer is a co-polymer acrylic emulsion designed to prime absorbent internal concrete substrates prior to the application of cementitious compounds. It improves adhesion and eliminates or minimises bubbling in the finished compound.
For Non-Porous substrates use 34 Two Part Primer.

Uniprime mortar additive is a modified latex polymer designed for general purpose use as an additive in conjunction with cement based adhesives any cement based mortar to enhance bond strengths, water resistance and chemical resistance.
Uniprime’s main uses are: Primer prior to tiling or plastering, Slurry bonding coat, Plasticizer for mortars, Reducing efflorescence, Adhesion enhancer in conjunction with cement based tile adhesives for: Vitrified tiles, Glass mosaics, Swimming pools, Industrial and commercial floors, dense smooth substrates.

A ready to use liquid silane siloxane impregnation. Uses are as a water repellant impregnation on concrete, mortar, brick, stone, asbestos and masonry.
A siliconised sealer used to improve resistance of water ingress on cement based substrates, mortar and stone surfaces such as Hinuera. Waterbased and breathable the treated substrates appearance remains unchanged. Improves resistance to dirt reducing fungal growth.

Uniflex is an acrylic polymer designed for use in cement based mortars to provide flexibility, enhanced strength, adhesion and resistance to chemicals, vibrations, and thermal movement, Uniflex can be used internally and externally for all tile and stone types that are not sensitive to water, including applications that are subject to total immersion.

Grout Add is a non yellowing acrylic grout additive for the RLA CTA grouting system and is suitable for internal and external applications in domestic and commercial projects for floor and wall tile grouting. Once cured the modified grout will provide a durable water resistant grout suitable for most applications, except those subject to strong chemicals.

Miracryl 2-Part is a high aluminate cement/acrylic, 2-part flexible waterproofing and sealing membrane.
It is a rapid curing, high build product and is ideal for waterproofing wet areas, shower recesses, balconies, terraces, water tanks, swimming pools etc. and will handle limited flexural movement. Miracryl 2-Part can be applied to concrete, rendered brickwork, block work, fiber cement sheet, gypsum board, particle board, and plywood. Datasheet as pdf file

Miracryl Substrate Primer (MSP) is a modified acrylic polymer designed for general purpose use as a primer for difficult substrates, but in particular for use when bonding materials to masonry, concrete, cementboard, timber, plywood, and cork sheet to give improved bond strengths. Its main uses is as a Primer prior to adhering various materials and coatings. Datasheet as pdf file

RL20 Hydrocoat is a grey two-part water-based epoxy primer sealer for concrete, masonry, fibrocement and other cementitious surfaces. Datasheet as pdf file

20 Hydrocoat satin is a clear two-part water-based epoxy primer sealer for concrete, masonry, fibrocement and other cementitious surfaces, designed to have a lower sheen finish. Datasheet as pdf file

20 Hydrocoat is a clear two-part water-based epoxy primer sealer for concrete, masonry, fibrocement and other cementitious surfaces. Datasheet as pdf file

Prebond is a one part polymer modified powder for improving adhesion over difficult tiling surfaces. Datasheet as pdf file

Flexco (N.Z.) Ltd
Solving Tomorrow's Building Problems - Today